Hi folks! Those who have the same problem with the remote control like I do: here is not a real solution but maybe a useful information: the problem is obviously NOT the remote control but the IR-sensor in the dvd-player. I have a Philips LCD an its led-lamp always blinks whenever I press a button on the RC of the dvd-player. I think this shows pretty good that the RC is strong enough but NOT the sensor in the player. I think the FW update wouldn’t change anything since this seems to be a hardware problem.

Well, this is no solution like I said earlier but should prevent anyone from hoping that a universal RC will make any difference.

This player is just great but leaks in a very important and basic feature: a well working remote control! I don’t know what philips did when they gave the “OK” to distribute this player…but they’ve to change this!

Anyway, this is a very good site and helped me to get through some issues.

Thanks & good night!

i have been having this black bar prob with this dvd player also when using this dvd player i can not change the aspe ct ratio with my tv does not happen with anything else i use is there a fix for this can anybody help

I have a problem,when some divx films play in DVD player,play only audio, video no !!! Please help me !!! Thak you

Dansoe

I have the red Corsair Flash Voyager 16 GB and its
working perfect on my 5960.

just want to say a ‘thank you’ for this article. I’ve got the 5960 since the beginning of this year (actually won the thing). Some things were bothering me (too long too explain), but this article helped me out very well.

So, thanks :)

I have red that not all USB devices work properly with the DVP5980… Can someone please tell me which one of these USB-sticks will work without any problems on the DVP5980?

Corsair Flash Voyager 16 GB

OCZ Rally2 16 GB

OCZ ATV 16 GB

I am planning to buy one of these USB-sticks

thx in advance!

Thanks for the firmware! I’ve been using it on a 3960 for a few months now. All I had to do is rename the file to my model number instead of 5960 and it went all well. It always remembers my 1080i setting now. Although I think the DivX/Xvid playback has lost a bit of its sharpness, but maybe I’m just imagining.

Hi I was just wondering is there anyway of upgrading the codecs for the dvp-5960

many thanks

jon

2 Questions – 1) How can I attach a 5.1 surround sound ‘home cinema’ unit – what hardware/wires do i need? 2) My Phillips doesn’t seem to want to play MPEGs – do i need to convert them or enable an option? Thank you in advance !!

Dear Sir,
Thanks for the firm ware.

Hi.Thanx for help with firmware.I have 500gb segate formated on two partitions.One 191gb fat32 formated by partition magic,second is ntsc partiton.First one working very good with dvp5960.Plug USB to the dvp5960 and wait for NO DISC on Your sreen then plug hard drive plug to socket.Dvp can see Segate.Thanx for help.

Bought a Philips DVD Player 5980K-75 three month ago and got it Region free with open tray-Preference Page and putting in 138931 . Bought the identical Model today and when on Preference Setup and trying to put the No in, Nothing comes up at all!Tried it with open and closed Door. Would you be able to help please? I am living in Australia! Thanks

Hi all!

Does DVP5960 supports HDMI-CEC?

I have this DVD player and want to get an external drive for it. I was wondering if anyone knew if the ‘Sharkoon SATA quickport’ would work with it?

I thought if I got one for the PC and one for the DVD player It would be much easier than moving the whole external drive every time I wanted to add files I could just move the HD itself.

I assume it would work since it has it’s own power source, and the guide says any external drive with it’s own power will work. But thought it best to get a second opinion before actually buying.

Thanks.

Whether the laser from these changes firmware has deteriorated?

Hi,

Am in the UK and have had a DVP5960 for a while now, and am very happy with it.

Currently is has 12.06.36.40 firmware on it.

Problem – Just bough a flip ultra camcorder – http://www.theflip.com/products.shtml – that has a usb built in so I can plug it directly into the DVP.

Doing this I can watch the avi’s that it produces directly by plugging it in. But there is no sound, because it is coming up with ‘audio codec not supported’.

Looking at the flip box. It seems to record in mpeg4 at 30 frames per second.

Question – Is there any modified firmware, or updates that I can make to the DVP5960 that can make it play the videos (with sound) when I plug the Flip video in it?

i am tempted to update the 3960/37 with your 5960 firmware, looks like i will loose the “Fix for Multichannel output via coaxial out when connected to HDMI”, do you know:
1) if i will also loose the hability to play nero digital videos (standard profile) with this 5960 firmware?

and also
2) if i use your 5960 fw can i revert to my 3960 firmware?

Hello,
I’m a French and my compliments for you site.
It is possible to use the firmware DVP-5960 with the philips DVP 3260 ?

My firmware (for a /5) is 12.07.31.30 – is this newer than the ones you have here?

The one thing I’d love is to have it always output on the Coax, without me having to go to the audio settings every time and tell it to.

Hi!
I’ve just bought the Prestigio Storage Data Safe II 120GB hoping it’ll be good but it isn’t : I’ve use formatfat32 but it’s seem to be a problem of not enought power. Am I right or is there an other solution?

Please can you mail me Foldersort too please. Or just tell me the name of a similar prog.

Thanks for everything.

the 5960 37B works awesome with my seagate free agent 750 GB. Here is what needs be done, 1> Download seagate Disc Wizard. 2> from windows comp’ mgmt’ delete the 698GB NTFS partition. 3> Run seagate wizard and create 1 single FAT32 primary partition of full capacity ~ 698 GB (Partial with remaining unallocated also works). 4> copy over divx/mpeg2 files 5> With 5960 OFF and no DISC connect yur powered ON USB HD to the player and power up and NJoy…This works…. I guess the KEY for the 5960 to recognize any external USB powered HD is that it’s Master Boot Record should show a single primary FAT32 partition…and ofcourse you are limited to the DOS8.3 format for file names on the display…But hey thats OK..as long as a I can browse and play all my media via the remote :-) cheers.

Been using an internal HD (320WD)in a external inclosure for a couple of years now. Since its getting full I decided to use another I had around (160Maxtor) and now I got a problem.
With the 320 I used folders and sub-folders and subs of those with no problems. With the 160 if I insert the avi into each individual folder no problem but if I attempt to put the avi into a folder called PIRATES_1 which is in a folder called P which is in a folder called MOVIES it freezes up at the MOVIE folder and I cant seem to get anywhere else….Any ideas
The above is just an example…Using a alphabetized sub folder helps me from having to go through 150 or more files to get to the last one

Reply

Sounds to me like the 160GB HD may be faulty, I have a similar drive here and works just fine, and I use loads of folders many levels deep...

Hi, i just changed my firmware without any problems :)

I have a question: Have do do i get it to sort after names? It seems like its sorting randomly. I am thinking about XviD CD/DVD’s.

I tried foldersort, but it doesnt seem to be doing the job.

Thanks in advance.

//frostic

Reply

Foldersort is all you've got I'm afraid. It always worked for me...

My Philips DVP5960 has firmware 37.06042.33. Downloaded movies avi, play fine, those I record as MPEG and convert play fine except for a brief stutter around the 12 minute mark on a 30 minute program, the video and the audio both stutter for perhaps 20 seconds and then all is fine.

They play fine with Windows Media Player. The total bit rate is well below USB 1 standards, I am not altering the fps and I have tried both direct audio encoding and tried matching audio length to video length with the same results. They are not PB files.

Any ideas if a Firware update would correct this? Also the latest firmware on Philips site has a lower number than mine, does that mean it is older and a downgrade of features?

Reply

Try ripping something with a different conversion program. What are you using at the moment?

Hi,
I think DVP5960 has a little bug.
When playing progressive DVDs it always deinterlaces them before sending the video through HDMI at 720p. I’m quite sensitive to these artifacts. Xvid, on the other hand, does not go through deinterlacing.

I tried to rip a fragment of a DVD movie into Xvid (at best settings), and the quality was better than the original. (strange!)

Wouldn’t it be possible to hack the firmware to NOT deinterlace progressive MPEG2 frames in DVDs? [apart from unnecessary, it degrades picture]

(thanks for all the info)

Reply

I doubt that's possible, unless you can talk Philip's into doing it...

Seems like FolderSort is no longer available to download.

Just when I need it. Even checked the torrent sites and nobody has loaded one.

Reply

I've mailed it to you, you'll need to change the extension back to zip...

LaCie Mobile Drive 100GB works well without power supply.
S-Tech External Box USB 2.0 2.5” IDE with 80GB TOSHIBA MK8032GAX Hard Disk works very well without power supply.
Thank you for this wonderful site!

I have tried using Nero to burn the firmware, but there is no .cue file. When I try to open the .bin with Nero, it tells me “unexpected file format” – what am I doing wrong? I also tried to burn the file using Alcohol 120% but it didn’t work.

Could I have step by step instructions?

Thank you.

Reply

They are on the page (Under "Upgrade Procedure), you just create an data CD-ROM in Nero, with a single file on it, the BIN file

Thanks for that site, you gave me confidence in buying that player.
I’m trying to figure out what Firmware I want to use, and I’m having trouble finding one that combines Packed Bitstream support, as well as more options for subtitles (I have many subtitles for divx). Could you give me some advice please?
Many thanks again!

Reply

Sorry dude, I have no idea anymore, havn't owned one of these players in some time now. Ask the guys over at the softpedia forum, they should be able to help you out.

Does anyone know if the Philips DVP5986K will work with a Seagate FreeAgent 750GB USB2.0 drive (the drive does not have firewire/eSata)?

I will reformat the drive to a single 750GB partition.

Hi,
Just bought this machine, but I’m having problems with audio on the HDMI port. Sometimes I get audio using the HDMI, but most of the time, there’s only picture and no audio.

I have looked the page through, but can’t see it mentioned anywhere – is this a known problem ?

cool site dude nudetube

Great website, thanks!

One question: do any of the firmwares have long file name support for usb menu?

Reply

Nope afraid not, please read the page before posting...

At the beginning of the manual (page 7) there is a list of 4 digit language codes. What are these used for and how are they implemented?

I had my Philips dvp 5960/12 for 3 days now and it is working great. But when I tried to upgrade firmware, in fact when I pressed setup, than 1 3 7 9, as suggested, I get an information that player have firmware version 12.07.13.26 which is not corresponding with the information on your site. The player is purchased in Macedonia and it has Cyrillic support. When I tried to upgrade according to the guide you provided, the player says unrecognisable disk. Is it because it has the newest firmware or anything else.

Thank you

Hi all,
I have one External USB HD Iomega 250GB (this one: http://www.systemaxdev.com/productmedia/htmlimages/cten/iomega%20hardrive/Q75647-front.jpg)

And using the parameters recommended by Phunkyfish (partition FAT32 Primary), it’s working very well !
No problems watching Divx/Xvid/Listening mp3s.

Bye.

I am using the MeTePe firmware so I can change the volume using the remote, this works great :)

However, is there any way to change the default volume of the player to 10 rather than 20? Or to put some firmware on the player where the default volume is 10?

Thanks

Toshiba External USB harddrive 500gb works a dream on the philips dvp5960/05. needs power connected first then switch on DVD and plays like a usb.
N>B confirm format is FAT32 and you are ready to rock and roll.

I am using philips 5982/37 with a philips HDCp compliant 22’ widescreen monitor.I am using HDMI to DVI cable. The problem is i cann’t upconvert over 480p. The firmware here u mention to solve the problem is for 5960/12. will this firmware also work for 5982/37? Pls help me.

Anyone know how to restore factory defaults on this one, my hdmi-hdmi connection wasnt working and i was messing round with other setting and picked something wrong and now I cant pick up the dvd player at all on scart, Any help much appreciated

hello,
The flash drive Kingston DataTraveller100 8gb work fine.

I like Porkupan Firmware with Packed bitstream support, but my wife doesn’t like the yellow subs. How do I change it back to white? I tried it but without any luck (Codepage 1252)
Thanks

Biigsy

All you need to get 5.1 is to buy a coaxial cable and connect the coaxial socket on the back of the Philips to the coaxial socket on the back of the Sherwood. Select the right input on the Sherwood. Of course you also need 5 or 6 speakers.

Hard Drive update:
I’ve tested my Western Digital “My Book ” 500gig external USB hard drive. It works on my 5960/37 with Wireless2104 Firmware dated 2007/01/29.

can anyone tell me what av equipment i need to get 5.1 surrond sound, i have sherwood6095r which does not work with this dvd player. thanks

Hi, If i download a HDTV episode of Lost for instance and play itthrough a dvd player with a HDMI cable to my HD Sony TV will i be watching the episode in true HD?

Thanks inadvance.

I am trying to watch avi and dvd files from the Philips DV5960 on a digital projector. They work fine using a composite video signal. I decided to try and watch them by connecting the Philips to my Panasonic DMR-EX75EB DVD recorder using the scart cable and then using an S-VHS cable to the digital projector. Picture displayed but in black and white. I tried a BT vision box on to the back of the Panasonic and the picture was fine and in colour. I have the UK version of the Philips and the firmware is the original 12.06.36.40. Can anyone suggest how I can get colour out. It works fine with a scart into my Samsung 28” CRT.

Thanks in anticipation.

Did you read all the posts? Probably not, njoser posted the latest one (http://rapidshare.de/files/38072466/bakup_philips_dvp5960.rar.html). If you have a newer one, don’t know how to extract.
Philips has been very bad about posting new firmwares

Ugo Kanain or anyone, would u happen to know where i can find out how to copy my original firmware on my dvdplayer?

To the previous posts:
1) You can reflash the unit with another version (as long as you have a copy)

2) I can watch divx, avi and xvid movies through usb, with the Porkupan firmware.

Hi I’m gonna try a one of the modded firmware listed here, but i would like to know if it didnt work too well, how do i flash it back to what it was orginally, if i can at all?? thanx

Can anyone please confirm if is possible to play Divx files directly from a USB device on DVP5960. Thanks

Thanks for all of the advice & tips. I actually tried just putting in a commercial DVD (ala Netflix), and the rolling pic stopped! Had a great weekend of watching avi pix (in our home, not having to shell out $$ for the theatres!) Again, thanks so much!

BTW, I’m using a SanDisk Cruzer Micro, 8GB, formatted FAT32, and after removing the U3 stuff – working perfectly except a little stuttering during “fast moving” scenes i.e. water in river scenes in No Country For Old Men.

“The issue is that the picture I get is constantly rolling”

I had the same problem after a firmware update. It set itself to Multi from NTSC. So, assuming you are trying to get from Multi to NTSC, here is the button sequence I had to use:

setup
right
right
ok
ok
down
ok
left
ok

Then you should be able to see another confirm request. left, ok and you’re done.

If it set to Pal and you’re going to NTSC, it’ll be 2 downs after the 2 ok’s.

If you don’t know what it’s set to, eject the tray and then hold down 3 for a few seconds and it should say in the top left corner of the rolling screen.

Let me know if that works for you.

Hi thanks for all your helpful info and links – I have almost the perfect home theatre system now without relying on a noisy PC!
I’d thouht I’d give something back;
This player DOES support resume playback even after coming out of standby – this includes avi files too!
Stop your current video/dvd,
Press stop again,
Power off (standby).
Power on,
Allow the dvd to start, select play then hit next chapter button and it will resume!
For avi;
load up your usb device, select the previous avi you were watching, click play, allow it to load and start playing, hit next chapter button and viola!

I hope this helps!
Andy.

Hello,
I have a 5960/12 connected HDMI-HDMI on a SONY KDL32S3000.
With a 16:9 DVD, the image format is good, but with a 4:3 DVD (for example ThePolice Synchronicity concert) , the image is stretched.
And with an HDMI connection, no way to change the image format on the TV : “unavailable function”.

The only way I found in order to control the format (by the TV) is to connect with Scart AND disconnect the HDMI!

Does anyone know sth about this pb? something as auto detection of format or change the format from the player would be nice…

I received the Philips DVP5960/37 as a gift, quite excited to start watching DivX movies via USB. The issue is that the picture I get is constantly rolling. I’ve referenced the Philips site and followed their instructions to fix it, but it didn’t work. I also tried changing the setting via the “settings” menu (using the manual as a guide b/c I couldn’t see the image on the screen w/o feeling ill) from PAL to NTCB (sp?), with no luck. I also tried pressing the “Upscale” button – didn’t work either. I haven’t tried updating the firmware yet – don’t want to mess anything up. I’d really like to get this player to work, before I exchange it for another Philips DVP5960. Thoughts?

..but on a positve note all memory sticks in my psp play all movies, mp3s and pictures when connected to the DVD player.

Hello,

Do you also have a little noise like a whistle (high pitch) near the red led when the player is on stand-by ? Thank you…

Please note that not all external hardrives work (even if FAT32) – Gericom External Drives are “Device not supported”. Great pages – appreacite all the effort.

Hello there,

According to this “If anyone has something else that should be added to the page please let me know…”
I here dare to ask you following question:

Is there a posibility to release modded FWs for DVD Philips 5980 ?

I suppose both models are on the same platform and modded FWs wouldn’t be too difficult to implement…

Thank you for considering this, I think readers should find in here at least an announcement if this bigger brother of 5960 would be listed in here.

Best regards,
Costi B.

Hi guys! I have bought a Philips 5960/12 a week ago. My TV set is 4:3. Video is connected through a single analogue exit (my old Sony TV doesn’t support any other connection). The thing is that i can’t get the difference between 4:3 pan scan and 4:3 letterbox. Changing this settings do not affect picture at all. In both cases i see something “in the middle” between full screen 4:3 pan scan and 4:3 letterbox. I know it, because i still have small black stripes on top and bottom, but the sides are cropped a little too. I can see that original size picture is cropped, when i do zoom 1/2.
Any solutions known to make 4:3 pan scan and 4:3 letterbox work as supposed?

I’ve got a Sandisk Cruzer that I like to chuck xvids onto to plug straight into the 5960/05(UK) to watch things. I keep getting stuttery/jerky playback when the picture gets a little complicated. I was using offical Philips latest firmware, but have now put Porkupan firmware on to try to resolve this – hasn’t worked. Any suggestions?

Can you help me figure out why this video would play choppy:

http://img337.imageshack.us/img337/9591/gscd3.jpg
http://img175.imageshack.us/img175/3492/mmxz3.jpg

I’ve done the packed bitstream test and only 2c didn’t play.

I’m using Porkupan firmware, it’s great. One question, how can I change between 3 font sizes, can’t find any answers on Google either…..

i have a question, can i play a dvd and display subtitles from a usb device on this player? Does anyone know how to do it.

Thanx,

I have a WD Essentials 500gb which i connect to my 5960 with all my .avi movies and tv shows. Does anybody else do this and if so what are their experiences and what f/ware do they use? I am currently copying all movies to the drive so havent connected it to the player yet but know that the filenames will be unreadable which is quite a setback.

Hi,
I’ve got Philips 5960/12 and I’ve got HD 300Gb.
The order of the movies is that of recording

Why the files (movies) meet disordered on my hard disk?

I want that the movies are ordained for name.

Since I can solve it?

Sorry for my poor english..

Thanks, JRM (Spain)

When i try to burn the .BIN firmware update file in Nero, it just says “Unexpected file format” and wont burn it. What am i doing wrong? (I’m using Nero 8)

“I’m using the latest Philips firmware, does this mean that PB isn’t unlocked on mine?

If I were to try a firmware from this site, would I be able to go back to the philips firmware after? Which firmware should I be going for? The Porkupan one?”

Yes, you can go back to Philips orig firmware if you want to.

For packed bitstream support use Porkupan 8.3. However you’ll lose bitstream digital audio out via coax (DD5.1, DTS) if you’re hooked up with HDMI (PCM is fine though).

For digital coax out support when connected through HDMI use Temi version 2. However you need to unpacked packed avi’s for smooth playback.

“Question though – in the features it mentions “3 font sizes”. Does this refer to the subtitles? If so, how do I actually change the size of the subtitles?”

On the Preference page scroll downwards and it will show (doesn’t show on 1st screen as there are more options). Small, medium and large

Hi there,
my 5960 is via HDMI at the TV.
My Audio comes via coax to an digital audio Receiver.
My whishes are:
OUPs off
GOTO in DVD mode

Which Firmware should I Download to have this features.

Thanks to the Modders for their great work.

I wish, I could do that too….

Greets,
Dennis

Just got the 5960 and tried the example vids on this site to test the packed bitstream.

Vid A plays fine as expect, vids B & D played (including audio) but were quite jerky and not smooth when the camera panned.

Unpacked the audio using the MPEG4Modifier and both B & D played fine.

I’m using the latest Philips firmware, does this mean that PB isn’t unlocked on mine?

If I were to try a firmware from this site, would I be able to go back to the philips firmware after? Which firmware should I be going for? The Porkupan one?

Just flashed my 5960/12 with Porkupan’s latest v8.3 firmware. Am very pleased – thank you!

Question though – in the features it mentions “3 font sizes”. Does this refer to the subtitles? If so, how do I actually change the size of the subtitles?

Hi,
Two quick questions…
1.Does this play NTSC DVD’s (with no colour balance problems),
...and…
2.More importantly,can anyone tell me if this machine has any problems playing “Data Disc DVD’s” (i.e. VOB’s particularly NTSC Video Files/MPGS’s/VCD’s/SVCD’s/MP3’s that I’ve downloaded/backed up via Nero).

I’m asking this as I’ve come across problems finding a DVD/DivX Player
that will recognise the files,(let alone play them with Audio).

Any information would be very gratefully received,

Thanks

Tim (UK)

For Mrga:

“So, to clear things up, you tell me I can use the newest firmware from Wireless2104 or Temi to get long titles and still keep multichannel output over coax?”

Yes, you have to chose a firmware “without” packed bitstream support.

Temi’s firmware (5960_12_Temi_V2_HDMI_AUDIO.zip) is OK if Codepage 1252 is suitable for you.

(By the way, I’m txemix not Tam, name is under the message.)

So it is okay to downgrade my firmware and that won’t brick my unit? What about if I end up not liking the features I may lose and want to upgrade again, that won’t be a problem if I have downgraded? (I’ve never really firmware updated anything before so I have no experience in this)

Hi!
Great Site you got here :)
I got a WD Passport 2.5” 120GB, and it dosent work :( I tried with a USBhub with external power but I only get: “Device not supported”. The USBhub is:
http://www.cnet.com.tw/product/cnusb-24.htm
And I plug in the external power first, then the Hub into the DVD-player, then I get the error. :(
Is it because the HUB or dosent the DVD support USBhubs?

Tam, thank you for your answer. I was confused because within each modified firmware description, there is text:

“Current list of features which are lost with this firmware:

* Fix for Multichannel output via coaxial out when connected to HDMI”

So, to clear things up, you tell me I can use the newest firmware from Wireless2104 or Temi to get long titles and still keep multichannel output over coax?

If you downgrade, then you loose whatever improvement were done between both versions.

I just got the 5960/37 and am quite happy with it. I do want longer file name support so obviously a firmware update from here would be great. My current firmware from the factory is 37.06.42.33. Will changing my firmware to a lower version cause any issues?

Id also like to point out the Gigacube 4gb works, though it has slow reading speed which seems to have tiny jerks in places.

Hi, great site – I’ve a question however.

I’ve installed porkupan’s firmware and generally it’s great but I can’t get the ISO resume or GOTO features to work.

Hitting the ‘NEXT’ button just goes to next chapter as before and ‘TITLE’ just shows the circle with the line through it suggesting that the command isn’t valid.

I know I must be missing something extremely obvious – any pointers?

Thanks.

Just bought an 5960 from amazon, plugged in via scart. I played your test avi’s and the packed bitstream ones work straight out of the box without firmware update, is this normal? Also tested an avi on my Crucial Gizmo 1gb usb stick, works fine.

my DVD cannot read dvd-r or dvd+rw but only cd-rw any ideas how to fix this?

Mrga:

“If all modified firmwares are based on genuine firmware 12.06.36.40, how is it possible that none of them includes fix for multichannel output via coaxial out when connected to HDMI?”

Some of them include the fix. Those that do not use the original ARM code which has proper packed bitstream support.

You have to choose firmwares “without” packed bitstream support (actually they support it, but not as well as original firwmare), for example Temi o Wireless1204.

None of the Porkupan versions include the fix, but you replace the ARM code in the Porkupan firwmare with the Temi’s one (I did, because of wanted ISO resume).

If all modified firmwares are based on genuine firmware 12.06.36.40, how is it possible that none of them includes fix for multichannel output via coaxial out when connected to HDMI? I need this feature, but I would also like to have nice features from modified firmwares. Is there some newer modified firmware out there?

The Sandisk Cruzer Micro Skin 4GB is also compatible.

I updated the firmware on a DVP-5960/37 manufactured in October 2007. The screen went all black and white and flashing. I sent the player back and got another one. It did the same thing.

It seems that they will randomly go to PAL output instead of NTSC when you upgrade the firmware. Note that it will do this with the factory firmware just as well as the modified version.

Fortunately, I was able to see the screen well enough to change it back to NTSC. I am using an ATI All-In_Wonder card. I don’t know how well a real TV will display PAL video.

You use the setup button on the remote and go to the video screen to fix it.

The PLAY.COM usb 2.0 2GB flash drive is compatible

I´m trying to watch avi.s taken with my Canon ixus digicamera, but the 5960 just says that it lacks codecs to play the files.
Can I download codecs for 5960, or should I convert my avi files (anf if so-how?)?

hi guys, I’ve replaced my philips 5960 remote control with an universal remote control, and I can say that there are no improvements, so the problem (short range with remote control) seems to be the player’s infrared.

Any chance that one could delete files and folders from the usb device? It would require a verification or something to prevent accidental erasure.

Also figured how to use the resume, however it doesn’t return correctly if the file was on the usb

Hi. I have a DVP-5960, but it seems as if the remote has completely died.

Does anybody know if there’s a way to enter setup from a Universal remote? I recently connected it to a new HD set, and would love to try something other than 480i.

Thanks.

hi,

This usb key Neo Slide Key 4 Go USB 2.0 is compatible?

thanks

could you advice me a good universal remote control to replace philips 5960’s one? It’s very BAD.

Original Firmware for Philips DVP5960/37 version 37.06.42.33

http://rapidshare.de/files/38072466/bakup_philips_dvp5960.rar.html

USB 2.0 support would be nice in order to play DVD files (VOBs)

Thanks in advance!!!!

Having already replaced the DVP5960 with a HD player at home, I figured I will try the Philips player at work with a Dell computer monitor with DVI. I hooked the DVD player to the monitor with an HDMI to DVI cable. When I fire up a movie everything looks great for a couple seconds and then I get a sceen message saying the monitor is not compatable (or something like that) and the video goes blank (audio keeps going). What’s up with that??

I have a DVP5960/37, I have a digital coax cable run to my amplifier (Panasonic), but not matter what DVP5960 says DD5.1 or MP3, my amplifier always shows 2-channel, is there something wrong with my DVP5960 or my amplifier?
Thanks.

I bought 5960/37. I have some mp3 with Chinese title. But it does not support Chinese character. Is there any firmware support to enable it to display Chinese title?

Hi I have recently bought a Sandisk Cruzer Micro 8Gb and the 5980 says its not compatible. I have not yet updated the firmware on the 5980, would this make any difference? The file format on the USB drive is FAT32, so its not that? Would disabling U3 or readyboost make a difference? or reformatting FAT32 from scratch maybe?

Any idea if an USB hub with an AC adaptor (required for use of high-power USB devices such as portable hard drives) could be enough for the bad list drives?

Thanks for all the work.
Is there any way to adjust the time that a photo is shown for in the photo viewing mode? It seems a shame it takes about 8 seconds for it to draw the high-res image and then it changes it about 5 seconds later. Pausing during drwaing doesn’t pause on the completed image it pauses the half-finished one. I’d be happy with a fixed display time of say 20 seconds if ithat would be possible in a firmware fix.
The dream would be for it to use double buffering so that we never see the redraw but that would be too much to ask.

Hi. I just bought a dvp 5960/37. I don’t have a flash drive yet so I can’t test this out but the manual does not state that it supports avi files from the usb drive. Is this true? If so, how do I make it so it will play avi files on a flash drive? What is the difference between the different firmwares listed on this page and which should I use? Thanks.

Hello!
Im having a problem with my dvp 5960 , i recently upgraded the firmware , i had the jerky imageproblem ,but i must had done it wrong, because all i can see is a blue screen and my DVD player went dead, only the philips letters appear in front, i followed the site instructions in the pdf file, i used nero to burn the bin file but after a few seconds the dvd tray opened and all buttons stopped responding , what can i do now , can i somehow reset it , please help!!!

I have the US version and it works perfectly with my WD Passport 250GB!

Does Anyboday knows if the firmwares modded work on 5960/55 models…

Thanks for the mod, I was looking for two features sorted file lists and direct time entry for specific time in the movie. Do you plan to make these changes?

Thanks

P. S. The 37 version defaults to pal, not to ntsc

Can 5960/5980 play DivX with size 2GB+ (1/2 DVD) from USB flash ??
Other players – Sumvision Lynx and ONN (ASDA’s brand) have failed play nearly all of such files. Size 1.4GB was fine for them though.
I’m trying to guess how happy I will be with Philips. Thank you.

Hello,

I just bought Philips DVP 5160 / 12 DVD-Player and I have a question: I made a dvd-r for the player with avi files but when I put it on I only have audio and NO video(it says that it does not have this codec). Can someone help?

Hello ..
I just got a DVP-5960.. I have no idea if its 12 or 37 how can I know also my version is:37.06.42.33 .. all the versions here ends with 29!! so I am confused..here is my problem on some xvid movies it starts realy chopping and then video works but sound does not work, not on all xvid only on some! I have had a cheap ritek before and I found a 3rd party frimware and it fixed my problem. I want to do the same with my philips but its too confusing with all these numbers what should I do?...Thank you

Hi

I am watching some (divx)avi movies on an external hard drive.

They play fine, but at some point i.e after 1hr 54mins, they stop playing.

I can’t work out why.
It will play all my files, but after a certain time, different for some movies, it just stops.

These movies play fine, all the way to the end on my computer, so there doesn’t seem to be any problems with them.

Anyone else come across this or heard of this?

All advice welcome cheers

We bought the DVP5960 several months ago and it’s driving us nuts, so much so that we’re on the verge of buying another player. We only use it to watch DVD’s as we’re not technically minded enough for any other usage. What’s driving us mad is the sluggish remote and the inability to FF or RW. I was looking to purchase another player when I came across this site offering solutions to problems and am hoping that you can save us a few quid by advising if their any solutions to this problem.

Hey

i just recently bought a philips DVP-5960 dvd player. one of the main reasons i was so interested in it is because of the cool usb feature. anyways i have a question about playing video files from my 4 gig usb thumb drive. i noticed that not only can the dvd player only play certain formats but the videos also have to be non copyright protected. after sorting through my files i found a few vids i could play but even then only a few were playable, even if the file is the correct format and non copyright protected. im still doing more testing about all of this but any help you can provide will be the best. thank you very much and im sorry if this message is too long.

I’m getting the slow juddering’ effect on some scenes when there to much information on the picture, mainly on trees scenes and snow and rain and fire, only judders a short time on some films.

Is there anyway of getting rid of the problem.

It’s not my firmware, already tried it on 2 with packed bitstream support.

Hi!
I love this site, as it is very informative…

I have 1 question though… I have a 5960 with Porkupan’s firmware. Now, how can I toggle between the font sizes concerning the subtitles? I can’t seem to find it anywhere, not in the display nor menu… Googling didn’t get me anywhere, so help please!

Thx!

I have an external hard drive (seagate freeagent) connected to this player and things work great. Except my srt subtitles dont show up! I have the avi file and the srt file in the same directory with the same name. For instance, CD1.avi and CD1.srt and it still doesn’t work. What am I doing wrong? Thanks.

Just bought this player and love it. Can anyone recommend a good home theater system to go with it and even a LCD Tv which will all compliment each other? Thanks

I have just bought the the DVP5960 and just tried to play a couple of avi files using the integral 2.0Gb flash memory stick.The picture was perfect but there was no sound at all,any help would be appreciated,cheers.

Is it possible to show .avis that are larger than 2GB – from either DVD or USB?

thanks for the advice,i use 3.5” seagate barracuda 7200.7 40GB,how long for it to load from the dvd usb port?

hi i have new dvd player player from china that can play dvd,mp3,wma,jpeg,divx and have usb port.when you use usb to watch movie its fine,but when you use hard drive 3.5” formatted fat32 and have 3partition ,it cant play,is it because the hard drive have partition?

Reply

Yes, you may only have one partition and it must be primary. How to format the drive is explained above.

Hi, I just got the DVP5960/37 and it won’t play MP4’s encoded with Nero, but I have a DVP3960/37 that does. I know that they aren’t advertised to play them, and they aren’t official Nero supported players. But, my 3960/37 plays them as long as they were encoded in standard format in Nero Recode and not in HD format. Can someone change the firmware so the 5960 can play them, too? If not I am taking the 5960 back. The fact that it has USB, while cool, isn’t a good enough reason for me to keep it since I like to encoded in Nero.

Thanks

I’m glad I found this beautiful site

Just wondering: the specs on the Philips website list mp3 compatibility up to 256 kbs (and 320kbs for the 5980).

So far, all my high quality mp3 play fine on my 5960.
So why would Philips undersell their product?

Lydokane,

I’d try burning them to CD or DVD and see if they play ok that way, if not try one of the firmwares available on this page and see if that sorts it. The latest Porkupan one plays everything I’ve thrown at it.

Ben,

Thanks for the reply. My 22 minute programs are about 175 – 178 MB. My 44 minute programs are around 345 – 350 MB.

Any suggestions?

Thanks.

Lydokane,

It’s not the file length that matter but the bit rate, if the files are huge then it may have a problem passing the data quick enough.

For say a 50 minute programme, about 750MB is probably the max that it will handle, if your files are larger then there is your problem.

I have this player and bought it JUST for the USB port. I use it often for .avi of my favorite TV programs. Does anybody know the max video size that the player can handle through USB? I ask because I’ve noticed that some of my TV shows are one hour (42 minutes after commercials are removed). I’ve noticed that anything over 45 minutes causes audio/video stuttering. If my show is 30 minute (22 minutes without commercials) then it usually plays fine. I have a firmware with bitstream support that I found on this site. I have tried three different USB keys and the results are the same.

It has been quite some time since I changed the firmware from the original to one that supports bitstream so I am not sure which version I am currently using. How do I check? Are there better firmware versions here?

Thanks,

Lydokane

P.S. Does anybody know why USB 1.0 was used instead of 2.0?

It’s me again
sorry, just found the problem – file name and extension MUST BE IN UPPERCASE

I tried to upgrade firmware (dvp5960/37): burned dvp5960_37.bin to CD-R following instructions:
Write files to CD-R/RW

but player displayed “Unknown Disk” message

Is there anything I am missing?

I apologise in case this has been explained before, but it seems that even FAQ hasn’t helped me a lot. I bought this particular dvd player (5980) because I had the impression that I would be able to play all those high definition avi files I had gotten in a >720 resolution. Maybe I have false information, but since this player claims to play 720p/1080i and 1080p through upscaling, shouldn’t I be able to play even those files as well?! So, why a resolution >720 isn’t supported?

I’m using a simple hdmi in-out cable for connecting to my Sony KDL 40U2000. Should I disconnect the scart cable first…because it seems that I can’t connect through HDMI at all, since I get no picture. Is there a chance that the cable is problematic?

Thank you in advance for any information you can provide me with.

Reply

Nope, it can upscale to 720p/1080p, but all video resolution must still be less than or equal to 720.

All it means is that the dvd player can output video in your TV's native resolution.

I don't have a HDMI TV so maybe someone else will answer your other question...

I currently use a Freecom 160GB External 2.5” HDD that works fine.

I’m using one of the custom firmwares (can’t remember which), but it worked with the Philips firmware

Hello!

I would like to find out porkupans email address, I’ll ask him which hex should I change to get autoload subtitles in my firmware (i have slovenian firmware, so I don’t want to use any other) for dvp-5160, Can you please help me?

Thanks!

Grega, Slovenia

i just got my dvp5960/37 and noticed the stuttering problem in avi files and decided to update the firmware

i followed all the directions exactly and ensured i had the right file, and the update seemed to have gone off without a hitch until it restarted.

technically, its still working fine…except the display is now…scrolling…very rapidly…like an old VHS on pause.

any idea what is causing this and what i could do to fix it?

What is the latest firmware version and where can I get it

How can I know what is the firmware version in my existing player?

How to take existing firmware backup from player?

Advanced thanks for your answers!!!

i just brought this dvd player and uploaded the firmware, but now ive got a serious issue in that when i put the playe onto standby, i can then do nothing at all. it wont let me turn it back on or anything, my only option is to remove the plug and start again. can anyone can help me with this problem? thanks

I checked the softpedia forum long and hard for the mod for disabling the timeout but can’t find it anywhere (re. your reply to James Jal Sept-17). Do you have anymore advice.

Reply

http://board.softpedia.com/index.php?s=&showtopic=4372&view=findpost&p=27290

Just bought a 5960/37, the region free hack works fine. I had the HDMI running through a HDMI-DVI adapter to my 1900×1200 PC monitor, which was working fine (although only at 480p). There was a bar of type on the screen saying that the monitor was not DCHP compliant. I was still able to watch—since applying the hack, however, the screen turns to a snowstorm after about 5 seconds. Did applying the hack change anything?

Download: DVP5960_12_vboroda_1252_v8.3_pb.zip [1.07mb]

hallo

warum habe ich mit diese firmeware keine 46 Zeichnen im Browser, ist das machbar?

danke

Hi,

I have problem with 5960/12 I can’t see any disk. When I insert DVD, or another disk I see only load… and nothing. Can you help me?

Reply

Try a DVD cleaning disc. Use one with brushes instead of cleaning liquid. If that fails bring it back to store where you got it and get a replacement.

re DVP5960/37 How can I control the volume from the remote? Is it a hidden function or do I need updated firmware? Thanks.

Reply

There is a firmware from MeTePe in the firmware's section. But it for the /12. It's not hidden functionality but someone would have to create a new firmware for you with this added in. Ask at the sofpedia forum and someone might be able to help you.

hi. got a problem here… i think my philips player just die on me… i think when i burnt the firmware onto the disc sumthing went wrong without realising it.. was originally using f-swed FW, then decided to upgrade again cause subtitle on some .avi files was too big to read or too blurry. i got the original FW from porkupan on disc and when i tried to reset it back too the its original setting nothing happen.. screen jus blank.. i think i really screw up this time (sud hav just left it as it is)... could anyone help me here as the only option i got left is to see if i a can take the dvd player back to where i purchase it from and see if they willing to let me exchange it for a new player WITHOUT a RECIEPT or BOX :(

thank in advance

Reply

Unless you know how to make a serial cable for changing the firmware you will have to bring it back. Try bringing it back first (say you were updating with the a newer Philips firmware not a modded one) and if that doesn't work out have a go at making a cable. The guys at the softpedia forum might be able to help you with that.

“Just bring it back to the store where you got it and get it replaced.”

I buy it in November 2006 and have garanty, but, may Philips replace it if I flashed the dvd whith an unnoficial firmware? Philips guessed it?

Reply

Nah, I've brought back players I've broken before and no problem.

Guys, some useful stuff here. Anyone know of a way to stop the player switching off automatically when not in use? It’s messing up the way my Harmony remote works as my TV skips the HDMI input if the player is off.

Reply

Have a look and the softpedia forum. There's a mod there somewhere for disabling the timeout. It might take a bit of searching.

Sorry for my poor english…

I have a big problem… When I updated the dvd the energy of my house are down… The player are crashed… In the led shows PHILIPS but it does´n works. What I do?? Help me, please!

Reply

Just bring it back to the store where you got it and get it replaced.

glad i found this site ,well done for all your hard work.

i am thinking of buying one of these to replace my 10 year old technics CD Player and double up as a dvd player and also play my mp3s.

Do you know how the sound quality would compare to my old technics or older CD players in general via the rca analogue connections

I see it has a 24 bit 192khz dac. but that dosent necessary make it great sound or does it

Reply

It would depend on the speaker system you attach it to.

I just bought a Kingston DataTraveler100, 4 GB. USB 2.0 key, and it works just fine with my DVP5960/12 (with the latest official firmware).

You can add this to the good-list, if you like.

Reply

Thanks, Added

Am thinking of getting a 5960. If I rip the VOBs & IFO to the external Drive will the 5960 recognize/play it?

Thanks

Reply

No, there far to big. USB 1.1 is not fast enough to transfer the data as quickly as required.

to feroxy & George

better to give an answer late then never =)

.

its a my book essential 500Gb

MDL: WD50000\032-001

inside it is a western digital IDE drive western digital WD 5000AAKB with 16 mb cache

When you turn your dvd player off it shutdown.
First partition should be fat not ntfs.

The drive very silent is cooled without a fan.

i also bought a LACIE portable 160 gb with a samsung drive in it it stuttered i brougt it back

I didn’t update my dvd player.

Q: Btw when you use one of those mod’s won’t you loose some functionality.
I remember people saying the couldn’t play some xvid files properly anymore

Hope you have enough info

gr fman

Just ordered a Recertified Fantom Titanium II 160GB 7200rpm USB 2.0 External Hard Drive for $39.99 AR from Buy.com. I want to load it with the best of my home movies that have been saved as AVI files. While I know I will need to be creative with short DOS names when I copy the files to the new FAT-32 formatted drive, I would like to make sure they will play. I use Studio 10 to make the AVI file. Are there any special parameters I should specify if I re-create the AVI files?

Reply

Avoid using GMC and packed bitstreams. Make sure your resolution has a max of 720x576 (PAL) or 720x480 (NTSC). But you could have just read the FAQ and figured this out for yourself!!!

Come on people, read the FAQ before posting...

is there a modded firmware for 5982/37 for packed bitstream and maybe long file names? if not how do i get and change the the modded arm codes so that it will be correct for the 5982? can i just swap the modded 5960 arm codes with philips latest 5982 updated firmware in MTKReMaker? or will i have to go a different rout? please help. thanx

Reply

Check the softpedia forum. Someone there will be able to point you in the right direction.

First thanks for all the great info on this player, learnt a lot but still learning.

Question : i have a 32” Sony CRT UK (PAL) i’m using TMPG to convert DVD’s to xvid. I’m wondering what is the best output resolution to minimise black bars, OR, are the black bars dependent upon the source resolution rather than the output resolution?

Also is Xvid the best quality or is there somethign better? I’m loading the movies onto an external HDD so i’m conscious of the bandwidth constraints of the USB 1.1 port.

cheers.

Reply

720x576 (PAL) or 720x480 (NTSC) are the max resolutions depending on where you are keep to the aspect ratio you need.

The player only plays XviD so it's all you can use, well that or DivX but they are quite similar. The quality of the XviD is the most important. The are many tutorials on the web on how to use XviD.

Has anuone had any problems with the player failing to load discs? Mine sticks on “Close” then opens the tray again.

This has only started in the last couple of days. Has anyone else had this or is mine just faulty?

Reply

Just bring it back for replacement.

The firmware by Porkupan for 5960/12 is great!
Because I don’t like to have an english OSD I made it multilingual for me.
So now the Philips is perfect!

Just got a new Philips DVP5892/37 and I was wondering if there is modified firmware for this model? I am interested in modding the subtitle format and timing. Thanks.

Reply

Sorry don't know. Try looking around the softpedia forums...

Hi I have bought a Philips DVP5965k/75. I have an issue the short DOS style 8 char menus that is driving me nuts. Can anyone tell me if I can use a DVP5960 firmware on this player. If so which one would be best, any help would be appreciated.

Reply

I doubt it would work. But there are no firmwares currently for the 5960 can go beyond 8 characters anyway.

I think I am a bit late in the game with this but I have just bought my Philips DVD player and now want to get an external hard drive to use with it, something between 120G and 500G. Which one do you suggest is the best and easiest to use?? I read above that I can use my 60G video iPod, will I have to do anything to get this working or can I just ‘plug and play’?

Reply

5th Generation iPod's don't work I'm afraid. Have one myself and no joy.

You should probably go with a Western Digital MyBook external drive. The feedback on those has been the best. Not a bad price either.

Hi ! Thanks for your great job on the dvp5960… I’ve got a problem with a crop of the movies at the right and the left of the TV (standard). I use DVP5960_12_vboroda_1250_v8.3_pb.zip [1.07m firmware. My TV is standard 4:3, and i choose the option “4:3 letterbox” on DVP’s Video menu.
Any idea ?

Reply

Have you tried just setting it to auto?

I'm used mine on loads of 4:3 TV's and I've never changed any settings? Even when going back to a 16:9 TV...

Hi and first what a great site – lots of helpful info and guides.

Is there a tool that can check the compatibility of a batch of files for playback on the DVP5960? I know GSpot displays info such as Qpel/GMC status and resolution, and there is a guide for batch-checking files
(http://ryan.com.br/gspot_batch_eng.html) but it would be great if there was a tool that quickly and clearly alerted you to files that may not playback on the DVP560.
I’ve burned several discs in the past of TV shows only to find that there is a file on there that is too high a resolution or encoded with GMC and it is a major annoyance!
If anyone knows of such a tool (or maybe plans on programming one!) I’d greatly appreciate hearing about it.
Thanks, Kev

Reply

The guide you referenced below is what I used. You can format the output of the file that GSpot creates. It will be a custom format, so only the information you want will be displayed, one file per line. This is easy enough to search for QPEL or GMC, but resolution is a bit trickier because the numbers will be text. I've never come across a solution to the resolution problem.

Maybe someone will see this post and write one for everyone!!!

On the other hand there are guides to removing QPEL and GMC in the guides and links section, you could just fix them as you come across them (I'm sure there are not too many of them). Buy a large USB Key and save on DVD's!

Sorry my earlier question was misunderstood. The black bar happens when upconverting at 720p or 1080i mode irrespective of the aspect of the dvd(2.35:1 or 1.85:1) on my widescreen TV.
I wanted to know if this problem was removed in any of the new firmware updates along with the multichannel audio support.

Reply

Anyone have a answer for this? I don't have an HDMI TV!!!

I have the latest Philips firmware for my 5960/37. Any updates to that firmware to remove the black bars at the top and bottom of the screens ? I just need that alongwith multichannel audio out with HDMI. I am fine with everything else thats in the current firmware. Thanks a lot.

Reply

The black bars are probably because the movie file your watching hss a different aspect ratio than your TV. Your TV will probably have a ratio of 16:9 (1.77:1). A lot of movies will be encoded at the theatre aspect which is usually 2.35:1, hence the black bars. Open some video files with GSpot (on the downloads page) and check the aspect ratio, just divide the width by the height. If there's one that works out at 1.77:1 or 1.85: 1 (Not sure which is NTSC or PAL!) it should not have black bars. Some DVD players will size up the image and cut off the edges of thee picture making it look like it fills the whole screen. The Philips player does not do this which is correct, so you see the entire picture.

If you have the latest Philips firmware you should already have the multichannel audio with HDMI fix.

The firmware posted here to fix and enable up-scaling above 480p using HDMI-DVI connection is for the DVP5960/12 but I am having this issue with the DVP5960/37 US player, is there a modified firmware available to fix the HDMI to DVI upscale problem on the DVP5960/37. I would be very grateful for any information.

Reply

The user renamed the firmare for the /12 from _12 to _37 and upgraded his player. It worked fine for him because he was using HDMI. This will not work using any other video output. Also note that from now on he would have to use /12 firmwares if he wants to upgrade but he must not rename them. His player now essentially thinks it's a 5960/12

Yes, my Philips DVP 5960/37 firmware is a higher version than on the philips site, which is why I do not want to “downgrade” to an earlier mod version with no way to get back to the v32 firmware I have. I just bough the machine last week.

Reply

You'll need to get a serial cable made, then you should be able to backup the firmware.

Ask at the softpedia board. They should be able to help you.

I want to try some mods, but I would like to know that I can get my original firmware back if it does not work for me. Unfortunatley, I can not find it anywhere … I have looked. So is there any info on how I can backup my current firmware, or does someone know a place to find it? (My current fw is 37.06.42.32)

Reply

You firmware version is higher than that released on the Philips website!

Is it a 5960 you have?

Post on the sofpedia board and see what they say?

Usb External drive working :
LaCie Mobile Drive – Hi-Speed USB 2.0 – 120GB

But i have to use the external power supply

Reply

Yes, all external hard disks will work with a power supply.

I only list those that work without a power supply!

So is the snow problem gone for the DVP5982 players?

Reply

I doubt it. They're identical players except for the 5982 upscales to 1080p instead of 1080i like the 5960.

I’ve got an lcd tv with a vga input. My tv isnt hdcp compliant. I was wondering if you can use hdmi to dvi to vga cords to bypass the hdcp? maybeee…probably just wishful thinking.

Reply

I don't think so. I think your TV must be HDCP compliant...

The only solution is to buy a non HDCP player...

Hello guys! I have a question: I noticed the player doesn’t read the wm9 video codec. Would it be possible to insert it in the firmware? Many thanks in advance :-)

Reply

I'd say this is way outside the scope of firmware modding. It's not so easy just to add a codec. It's not a PC, it was designed for DivX/XviD...

My Sandisk Cruzer Mini 128mb also works on the dvp5960/37.

You can add it to your compatibility list if you want.

Reply

Added

Hi,
i have the DVP5960 connected up to a Philips 37pf5520d HD ready LCD TV, via hdmi to DVI-I connector (as not straight HDMI connection on the TV…earlier model) and can get only the standard low 420 resolution…if i try to change it to a higher spec ….eg 1080i…i get asked to confirm the change….but then nothing happens and is still set back to the lowest resolution….any ideas ????

Reply

Sorry, I don't have a HD TV so I have no idea! Someone else will have to answer this for you...